I hand wash the vehicle and pressure wash rinse. Then, I chemically clean the wheels and wheel wells, to remove all brake dust. Lastly, I chamois dry the exterior, dress the tires, vacuum the interior, and clean the windows.
WASH & WAX:
I hand wash as above, hand wax exterior, detail by removing wax from cracks, and polishing chrome.
BUFF & WAX:
I hand wash, as above. I machine buff the exterior paint to remove lite oxidation, scratches, and marks from all painted surfaces. Then, I detail exterior, as explained above.
I shampoo, clean, and detail every inch, inside the vehicle. I clean the door jams, and pressure wash all floor mats.
I hand wash, to clean in the tight corners, remove any exterior dead rubber from window seals, tires, and bumpers. Then, I machine buff the paint to remove lite oxidation, scratches, and marks. I then hand wax the exterior, detail exterior by removing wax from the cracks, polish the chrome, chemically remove any brake dust from wheels & wheel wells, and dressing exterior rubber. I then shampoo and detail 100% of the interior, degrease,& pressure wash the engine compartment, door jambs, spare tire, gas filler, and frame of auto. Lastly, I pressure wash floor mats and put vehicle back together.
CLAY BAR EXTERIOR:
Clay bars gradually remove any bump on top of the hard, flat, smooth finish of the exterior (examples: hard water spots, paint overspray, & industrial fallout).
I safely raise your motorcycle on a hydraulic lift for easy access. Then, I remove the windshield, seat, saddlebags, and anything else easily removed. I start by thoroughly chemically washing every inch of the bike and all parts. I blow dry bike and parts for a spot free finish. Then, I buff and fix any paint imperfections. I apply two coats of teflon and resin for a permanent wax coating. Lastly, I remove any wax from cracks, polish all chrome and aluminum, and treat all leather.
MOTORHOME & RV EXTERIOR DETAILING
I empty all exterior compartments, before I begin. Then starting from the roof, I chemically wash the entire exterior, including awnings, slideouts, and compartments. I compound the exterior to a smooth, nonporous finish. Then, I buff the exterior with a polish, to remove dirt, compound, and buffer swirls. I then, handwax complete exterior with a quality paint sealant, for a longer lasting finish. I detail exterior by removing all wax from cracks, polish chrome, dress the tires, and clean the windows.
I empty all compartments, boat gear, and cushions. I start by chemically washing the entire boat, inside and out. I then wet sand the sun deteriorated gelcoat, compound the sanded gelcoat back to an even shine, and buff the entire boat with a marine polish, to remove buffer swirls, dirt, and compound. I then apply a good marine wax by hand, to entire boat, inside & out. I finish the detail by removing any wax from cracks, polish all chrome & aluminum, and apply a treatment to all vinyl & rubber.
1244 Viscaya Pkwy,Cape Coral, FL
I remove the headboard from the vehicle. Then I completely remove the deteriorated foam and cloth from the board. I then install new fowm and cloth to the board, using cabinet glue so it lasts longer. I wrap the material to the top of the board an inch all the way around the board so when it starts to shrink it can't fall around the edges, like they use to do them from the factory. Then I reinstall the headboard to the vehicle.